All posts

OpenCode vs Claude Code (2026): Models, Cost, and Workflow

Alook Team//8 min read

OpenCode and Claude Code logos on a diagonal comparison cover, with Models, Cost, Workflow, and 2026.

Claude has handled the difficult part of a coding task, and you want to try a cheaper model from another provider for the remaining edits. Switching tools may mean explaining the task again: which changes are finished, what still needs work, and which test command to use.

OpenCode lets you change providers inside the same conversation, including when you start with Claude. Claude Code works with Claude models and includes memory, hooks, and agent teams. Would access to another provider save you enough work to justify setting up a second tool? If you're already on OpenCode, the choice runs the other way: is Claude Code's built-in setup worth giving up model choice?

OpenCode vs Claude Code: Everyday Workflow

Switching Models and Continuing a Session

Both tools work in a desktop app or a terminal. On desktop, use OpenCode Desktop or the Code tab in Claude Desktop. If the cheaper model comes from another provider, OpenCode lets you bring it into the same conversation. For a lighter Claude model, Claude Code's /model handles that switch too.

In OpenCode, /models changes the model for the current session. You keep going in the same chat instead of copying the task into another tool.

The next model may read the same discussion differently. Give it a short handoff: “Keep the database change; finish the error messages; run this test command.” That's a clearer job than “read all this and carry on.”

Starting a New Session: What Does Each Tool Remember?

Claude Code can reopen a saved session. In a new one, it reads your project instructions and auto memory: notes it writes about your project and preferences. Our guide to Claude Code memory explains those notes.

OpenCode saves conversations too, so you can continue the last one or pick an older one. OpenCode V2 has no built-in equivalent to Claude Code's cross-session auto memory. Lasting project rules go in AGENTS.md. For automatic notes across sessions, you'd need to add a memory plugin.

If yesterday's discussion still matters, reopen the original session. Rules needed across future tasks go in CLAUDE.md or AGENTS.md, whichever the tool reads. A saved chat history on disk doesn't replace the project file that a fresh session loads.

Retrying a Change or Continuing Elsewhere

We'd use Claude Code's /rewind to keep good code and drop a discussion that went off track, and OpenCode's /undo to roll back the affected files and try a step again. Both tools can fork a conversation to explore another approach. To continue working after closing your laptop, use a Claude Code cloud session or keep the OpenCode server running on another machine.

Subagents and Agent Teams

A review is a good reason to use a subagent: the main agent finishes a change, then a separate worker looks for problems and reports back. Both tools can give the reviewer a separate conversation to work in. In OpenCode, you can set the model and permissions for each custom agent, so you could keep the main task on Claude and assign the review to another provider.

Claude Code's experimental agent teams go further: teammates have their own sessions and can communicate directly. You enable teams by setting CLAUDE_CODE_EXPERIMENTAL_AGENT_TEAMS=1. They make sense when one agent's findings should change another's work. For a quick independent review, a single subagent is enough. Connecting through Claude Agent gives you OpenCode's subagents, rather than Claude Code agent teams.

For hands-on editing with an agent beside you, our Cursor and Claude Code workflow comparison compares those two setups.

Finding Your Way Around an Unfamiliar Repository

In a June 2026 demonstration by fff developer Dmitriy Kovalenko, Claude Code and OpenCode 0.17.3 investigated how isolates and threads share memory in Chromium. That OpenCode version predates the V2 setup described in this article.

The author reported using the same model, provider, effort and prompt. OpenCode used fff for file search. Claude Code did not access it through MCP in this test. The recording shows Claude Code delegating exploration and running shell searches. OpenCode read the relevant files through a different sequence. The author reported identical answers, with more round trips in Claude Code.

For work in unfamiliar repositories, we'd look at the search path as well as the answer. Repeated searches can add waiting and context to each request. We'd favor a clear explanation tied to the relevant code over a long trail of repeated searches. For implementation work, the patch and its tests still matter more. We wouldn't choose an agent to make the change just because it finished the search sooner.

OpenCode and Claude Code Pricing: What Are You Paying For?

OpenCode is free to install. You pay for the model through a plan, an API account, or the hardware you run it on. Claude Code accepts API accounts as well as Claude subscriptions. How you connect decides which allowance or bill you're spending:

SetupWhat pays for requestsHow you reach the modelWhen it fits
Claude Code with a Claude planPro starts at $20/month, sharing allowance with your Claude chatsClaude Code's login and toolsYou use Claude daily and rely on its saved notes or hooks
OpenCode with Claude AgentThe account Claude Code is signed in withClaude Code on your machine calls the model; OpenCode supplies tools and permissionsYou have a Claude account and want another provider to finish part of a task
OpenCode with GoGo starts at $10/month, with model-specific limitsOpenCode Go providerGo's models cover the work you repeat most
OpenCode with a direct API or another providerIts API bill or account allowanceThat provider's connectionYou need a particular model or already have access through that provider

Can You Use a Claude Subscription in OpenCode?

Yes, through OpenCode's Claude Agent provider. Install Claude Code 2.1.248 or later, sign in through claude auth login, then select Claude Agent in OpenCode's /connect. The Anthropic provider asks for an API key instead.

Claude Code handles model calls and tools in its native app. With Claude Agent, local Claude Code calls the model and OpenCode runs tools, permissions, and configuration. Other providers can supply models to OpenCode.

Claude Agent draws on the same account and allowance as your normal Claude Code use. Claude Pro and Max have five-hour and weekly limits. Verified Ultra accounts have no five-hour limit and get ten times Pro's weekly allowance. With an API account, you pay per use instead.

Anthropic permits personal subscription sign-in to unmodified Claude Code, while requiring prior approval for third-party products that offer subscription login or rate limits. If a Claude subscription is your main source of coding access, we'd keep native Claude Code as the default.

With an existing Claude account, you can try OpenCode's interface through Claude Agent. Switching providers in the same chat is a reason to keep using OpenCode. If Claude Code's saved notes, test hooks, or teams are what you rely on each day, keeping the native tool saves rebuilding that setup.

OpenCode Go, API Keys, and Local Models

OpenCode Go offers Go at $10/month and Go Plus at $40/month. Each model has its own allowance across five-hour, weekly, and monthly windows.

At $10, Go gives you models such as Kimi K3.1 Pro, MiniMax M3.1 Flash, and DeepSeek V4.1 Flash. At $20, Claude Pro gives you an allowance for Claude models in Claude Code. Claude Code's memory and hooks work with API accounts too. For work covered by one of Go's models, the $10 plan is a cheaper starting point. With Claude Pro, you pay a fixed monthly price for the included usage instead of a per-token bill. The cheaper plan saves money when you can get everyday work done without spending the difference on corrections.

With API keys, you pay for the context the agent sends with each request, including instructions, history, and tool results. A very short prompt can still arrive with substantial context. For a task you repeat, count the retries and corrections in its cost too. Local models swap that provider bill for spending on hardware and electricity.

Permissions, Project Rules, and Memory in OpenCode V2

OpenCode V2 allows most actions by default, including access outside the project, but asks before directly reading sensitive environment files. The same Claude account won't bring over the permission rules you used in Claude Code.

V2 reads AGENTS.md and doesn't automatically fall back to CLAUDE.md. A V1 setup guide can therefore leave your V2 project without the rules you expected it to load.

What you rely onWhat happens in OpenCodeWhat to doHow to check it
01Rules stored only in CLAUDE.mdV2's default file search skips itPut shared rules in AGENTS.md, or list CLAUDE.md under instructionsStart a small task and check that it uses the test command written in that file
02Claude Code auto memoryThose notes stay in Claude CodeCopy the guidance you need into AGENTS.mdOpen a fresh session and check it applies that guidance
03Claude Code hooks and permission settingsOpenCode decides what runsSet those checks up in OpenCodeTrigger the check with a harmless task and inspect its output
04Claude Code skills and MCP setupOpenCode loads its configurationCheck its skills folders and configure the MCP servers againInvoke a skill you use every day and make a read-only call to the server

V2's new plugin API can also require porting an old plugin, even though supported old configuration fields convert automatically. For a project that depends on plugins, check for a V2 release before upgrading, then trigger the plugin and run your tests in the upgraded setup. You can keep a tested OpenCode version and inspect or modify its code while preparing that upgrade. Track the model and provider separately: a hosted model update can change results even when the OpenCode version stays fixed.

If you move from OpenCode to Claude Code v2.1.281 or later, it reads AGENTS.md by default only when no CLAUDE.md, .claude/CLAUDE.md, or CLAUDE.local.md takes precedence in the working directory or its parents. An @AGENTS.md import in a neighboring CLAUDE.md brings the shared rules in. Your OpenCode plugins and permission settings still need Claude Code counterparts.

Anthropic maintains Claude Code's built-in tools, leaving you less setup to maintain when they cover your work. OpenCode gives you more room to change the tool when its built-in behavior falls short. A project using only provider connections has fewer extensions to look after.

Should You Choose OpenCode or Claude Code?

Choose Claude Code if Claude does your work well and you want its native memory, hooks, or team workflow, whether you're keeping an existing setup or moving from OpenCode.

Choose OpenCode if you have a concrete use for another provider, want to switch models mid-task, or need to inspect and modify the agent. You'll be the one setting up providers and project rules. If you've hit your Claude limit, switching to Claude Agent in OpenCode won't give you more allowance.

Use OpenCode and Claude Code Together with Your Team

If you keep both tools and other people need to review the work, Alook gives you a shared channel for the discussion. For multi agent collaboration, bring an OpenCode bot and a Claude Code bot into that channel, decide who takes each task, and review their work together. To connect both tools and start a shared conversation, follow our OpenCode and Claude Code setup tutorial.

Open AlookMore blogs